poolife® Stain Lift – 2.5 lbs.
The first stop is saying goodbye to stains. This concentrated, granular stain remover quickly removes stains caused by copper, iron, manganese, cobalt and silver. After stains are removed, follow up with the weekly addition of Poolife® Stain Stop.
- This product can be used on most pool surfaces including gunite, most plaster, concrete, vinyl and fiberglass.
- This product is not intended for use on pools with black plaster.
HOW TO USE FOR START UP
Adjust pH between 6.8 and 7.2 and allow free chlorine level to drop below 2.0 ppm, then add 2.5 lb per 20,000 concentrate product in areas where stains are most prevalent. Allow to circulate for 24 hours then readjust the pH to 7.4-7.6 and total alkalinity to 80 – 120 ppm ranges. Maintain normal sanitizer levels. Do not shock for at least 72 hours.
HOW TO USE FOR MAINTENANCE DOSE
For maintenance and prevention of stains add Poolife Stain Stop once a month
Can be used with all chlorine, bromine, salt water, ozone and mineral based sanitizing systems
For removal of metallic stains including iron, copper, manganese
Lifts metallic stains cause from hard water, iron, copper and manganese